Tridonic LC 17W 250-400mA flexC SC SNC4: Constant Current ON/OFF LED Driver (Article Number: 87501082) -IP20

Immediately available

Tridonic LC 17W 250-400mA flexC SC SNC4: Constant Current ON/OFF LED Driver (Article Number: 87501082) -IP20

Immediately available

Brand: Tridonic

Dimming Signal: Not dimmable

Rated Supply Voltage: 220 - 240 VAC

Output Current (mA): 250-450

Application: Indoor Application

Operating Mode: Constant Current

Protection Type: IP20

Output Power (W): 17

Introducing Tridonic’s Fixed Output LED Driver: adaptable for built-in or independent use with clip-on strain relief, suitable for both protection class I and II luminaires. This constant current driver features selectable fixed output currents via DIP switch (250, 300, 350, and 400 mA), ensuring versatility and longevity with a nominal lifetime of up to 100,000 hours.

Product information "Tridonic LC 17W 250-400mA flexC SC SNC4: Constant Current ON/OFF LED Driver (Article Number: 87501082) -IP20"

Product description

  • Fixed output LED driver
  • Can be either used built-in or independent with clip-on strain-relief (see accessory)
  • Independent LED driver with cable clamps
  • For luminaires of protection class I and protection class II
  • Temperature protection as per EN 61347-2-13 C5e
  • Constant current LED driver
  • Selectable fixed output current via DIP switch 250, 300, 350 and 400 mA (pre-selected current 250 mA)
  • Max. output power 16.8 W
  • Nominal lifetime up to 100,000 h
  • 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)

Housing properties

  • Casing: polycarbonate, white
  • Type of protection IP20

Functions

  • Overload protection
  • Short-circuit protection
  • No-load protection

Typical applications

  • For spot light and downlight in retail and hospitality applications
  • For panel light and area light in office and education application

 

Technical Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 2 h
Max. input current (at 230 V, 50 Hz, full load) 88 mA
Typ. power consumption (at 230 V, 50 Hz, full load)  19.5 W
Min. output power 6.0 W
Typ. efficiency (at 230 V, 50 Hz, full load)  85.5 %
λ over full operating range (max.)  0.97
λ over full operating range (min.) 0.86 C
THD (at 230 V, 50 Hz, full load)  < 15 %
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Output current tolerance  ± 7.5 %
Max. output current peak  ≤ output current + 12 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 55 V
Mains surge capability (between L – N) 1 kV
Mains surge capability (between L/N – PE) 2 kV
Mains burst capability 1 kV
Surge voltage at output side (against PE) 3 kV
Ambient temperature ta (at lifetime 50,000 h) 50 °C
Storage temperature ts -40 – 80 °C
Type of protection IP20
Length 70 mm
Width 43 mm
Height 22.5 mm
Lifetime up to 100000 h
Guarantee 5 years
(1) Test result at 400 mA.
(2) Output current is mean value.
(3) Test result at 25 °C.

Download

Datasheet
Tridonic Driver LC 17W 250-400mA flexC SC SNC4: Constant Current ON/OFF LED Driver