Tridonic LC 100W 24V SC SNC2: Constant Voltage ON/OFF LED Driver (Article Number: 87501052) -IP20

Immediately available

Tridonic LC 100W 24V SC SNC2: Constant Voltage ON/OFF LED Driver (Article Number: 87501052) -IP20

Immediately available

Brand: Tridonic

Dimming Signal: Not dimmable

Rated Supply Voltage: 220 - 240 VAC

Output Voltage: 24 VDC

Application: Indoor Application

Operating Mode: Constant Voltage

Protection Type: IP20

Output Power (W): 100

Discover the Tridonic independent constant voltage LED driver. Compact yet powerful, it provides a stable 24V output with a maximum power of 100W. Ideal for various applications including cove lighting and facade accents, it offers dimming capability and easy installation with push terminals.

Product information "Tridonic LC 100W 24V SC SNC2: Constant Voltage ON/OFF LED Driver (Article Number: 87501052) -IP20"

Product description

  • Constant voltage LED driver
  • Output voltage 24 V
  • Max. output power 100 W
  • Dimmable via external PWM LED dimmers attached on output side
  • For luminaires of protection class I and protection class II
  • The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
  • Nominal lifetime up to 50,000 h

Typical applications

  • Cove lighting, facade accent lighting, ceiling integration, refrigerated displays

Technical details

  • 24 V, 100 W
  • Small design (295 x 43 x 30 mm) with stretched-compact strain relief
  • Very good THD performance in wide load range < 20 %
  • Output LF voltage ripple (< 120 Hz) ± 1.5 %
  • Power input on stand-by < 0.5 W
  • Small cross section
  • Push terminals for simple wiring

System solution

  • Tridonic LLE-FLEX ADV G2 600, 1,200, 1,800 lm/m
  • Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
  • In connection with Flex accessories wire to PCB plug

Common data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load)  485 mA
Typ. input current in no-load operation < 70 mA
In-rush current (peak / duration) 49.4 A / 235 µs
Max. input power 109 W
Typ. input power in no-load operation < 0.5 W
Typ. efficiency (at 230 V, 50 Hz, full load) 92 %
λ over full operating range (max.)  0.98
λ over full operating range (min.) 0.8 C
THD (at 230 V, 50 Hz, full load)  < 10 %
Starting time (at 230 V, 50 Hz, full load)  < 0.5 s
Turn off time (at 230 V, 50 Hz, full load) < 0.5 s
Hold on time at power failure (output) 0 s
Output voltage tolerance ± 1 V
Output LF voltage ripple (< 120 Hz) ± 1.5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 25 V
Mains surge capability (between L – N) 1 kV
Mains surge capability (between L/N – PE) 2 kV
Burst capability 1 kV
Type of protection IP20
Length 295 mm
Width 43 mm
Height 29.8 mm
Lifetime up to 50000 h
Guarantee 5 years
(1) Valid at 100 % dimming level.

Technical Data

Type

Article number

Load

Output current

Output voltage

Typ. current consumption

Max. output power

Typ. power consumption

Ambient temperature ta

tc point max

tc point max

LC 100W 24V SC SNC2 87501052 0.3 1250.0 mA 24.0 V 173 mA 30 W 34.5 W -20 – 50 °C 85.0 °C 80.0 °C
LC 100W 24V SC SNC2 87501052 0.4 1667.0 mA 24.0 V 215 mA 40 W 44.9 W -20 – 50 °C 85.0 °C 80.0 °C
LC 100W 24V SC SNC2 87501052 0.5 2083.0 mA 24.0 V 257 mA 50 W 55.3 W -20 – 50 °C 85.0 °C 80.0 °C
LC 100W 24V SC SNC2 87501052 0.6 2500.0 mA 24.0 V 300 mA 60 W 65.8 W -20 – 50 °C 85.0 °C 80.0 °C
LC 100W 24V SC SNC2 87501052 0.7 2917.0 mA 24.0 V 345 mA 70 W 76.3 W -20 – 50 °C 88.0 °C 88.0 °C
LC 100W 24V SC SNC2 87501052 0.8 3333.0 mA 24.0 V 390 mA 80 W 87 W -20 – 50 °C 88.0 °C 88.0 °C
LC 100W 24V SC SNC2 87501052 0.9 3750.0 mA 24.0 V 435 mA 90 W 97.7 W -20 – 50 °C 88.0 °C 88.0 °C
LC 100W 24V SC SNC2 87501052 1 4167.0 mA 24.0 V 482 mA 100 W 108.5 W -20 – 45 °C 88.0 °C 88.0 °C

Documents

Datasheet
Tridonic LC 100W 24V SC SNC2: Constant Voltage ON/OFF LED Driver