Tridonic LC 15W 350mA fixC pc SR SNC2: Constant Current TRIAC LED Driver (Article Number: 28003345) -IP20

Immediately available

Tridonic LC 15W 350mA fixC pc SR SNC2: Constant Current TRIAC LED Driver (Article Number: 28003345) -IP20

Immediately available

Brand: Tridonic

Dimming Signal: Phase-cut / Triac

Rated Supply Voltage: 220 - 240 VAC

Output Current (mA): 350

Application: Indoor Application

Operating Mode: Constant Current

Protection Type: IP20

Output Power (W): 15

Introducing Tridonic’s Dimmable Constant Current LED Driver (SELV): an independent driver with strain-relief housing, ideal for constrained installation conditions. It’s dimmable via leading/trailing edge phase dimmers, offering a dimming range of 5 to 100%. With a maximum power of 15W and output current of 350mA, it’s compatible with luminaires featuring EN 60598, VDE 0710, and VDE 0711 standards. Backed by a 5-year guarantee, it includes overload, short-circuit, and no-load protections, ensuring reliable performance.

Product information "Tridonic LC 15W 350mA fixC pc SR SNC2: Constant Current TRIAC LED Driver (Article Number: 28003345) -IP20"

Product description

  • Dimmable constant current LED driver (SELV)
  • Independent driver with strain-relief housing
  • Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
  • Dimmable via leading edge and trailing edge phase dimmers
  • Trailing edge is a benefit in terms of noise compared to leading edge
  • Dimming range 5 to 100 % (depending on dimmer)
  • For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
  • Max. output power 14.7 W
  • Output current 350 mA
  • Nominal lifetime up to 50,000 h
  • 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)

Housing properties

  • Casing: polycarbonate, white
  • Type of protection IP20
  • Push-in terminals
  • 2 separate strain relief parts for input and output cables with highly robust clamps

Functions

  • Overload protection
  • Short-circuit protection
  • No-load protection
  • No output current overshoot at mains on/off

Common data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
THD (at 230 V, 50 Hz, min. load) < 12 %
THD (at 230 V, 50 Hz, full load) < 10 %
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure 0 s
Output LF current ripple (< 120 Hz) ± 3 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Mains surge capability (between L – N) 1 kV
Mains surge capability (between L/N – PE) 2 kV
Mains burst capability 1 kV
Surge voltage at output side (against PE) 2.5 kV
Storage temperature ts -40 – 80 °C
Guarantee 5 years

Technical Data

Parameter Value
Type LC 15/350/42 fixC pc SR SNC2
Article number 28003345
Output current (1) 350 mA
Typ. rated current (at 230 V, 50 Hz, full load) 86 mA
Min. forward voltage (2) 27 V
Max. forward voltage (2) 42 V
Max. output voltage (U-OUT) 60 V
Max. output power 15 W
Output power range 9.5 – 14.7 W
Typ. power consumption (at 230 V, 50 Hz, full load) 17.9 W
Efficiency at min. load (2) 80 %
Efficiency at full load (2) 82 %
λ at full load (2) 0.95
λ over full operating range (min.) (2) 0.95
Output current tolerance (at 230 V, 50 Hz, min. load) (1) ± 7.5 %
Output current tolerance (at 230 V, 50 Hz, full load) (1) ± 7.5 %
Max. peak output current 384 mA
Ambient temperature ta (at lifetime 50,000 h) 35 °C
Ambient temperature ta -20 – 45 °C
Max. casing temperature tc 70 °C
Lifetime Up to 50000 h
Length 101.5 mm
Width 49 mm
Height 29 mm

(1) Output current is mean value.
(2) Test result at 230 V, 50 Hz without dimmer connected.

Documents

Datasheet
Tridonic Driver LC 15W 350mA fixC pc SR SNC2: Constant Current TRIAC LED Driver

You may also like

Here is the text to main heading, something that describes and complentcomplaint