ENOV EV-EM-250 Emergency Battery Kit for LED Modules

Immediately available

LiFePO4 battery pack for the ENOV EV-EM-250 LED emergency battery kit

ENOV EV-EM-250 Emergency Battery Kit for LED Modules

Immediately available

Brand: Enov

Input Voltage: 220-240V AC

Output Voltage: 50–230V DC

Type of Battery: LiFePO4

Emergency Power: Power Options: 2.5W, 5W, 7W, 10W, 15W, 20W

ENOV EV-EM-250 emergency battery kit for 50–230 V DC LED modules. Six constant-power models (2.5–20 W) provide three hours of backup with LiFePO4 batteries. Select a model and request a quote in Qatar.

Product information "ENOV EV-EM-250 Emergency Battery Kit for LED Modules"

ENOV EV-EM-250 emergency battery kits add three hours of backup to compatible LED modules. The series offers six constant-power outputs: 2.5 W, 5 W, 7 W, 10 W, 15 W and 20 W. Each kit pairs an emergency inverter with a LiFePO4 battery matched to its output.

Choose the right EV-EM-250 model

Start with the emergency output required by the lighting design, then confirm:

The LED module’s forward voltage is within 50–230 V DC.
The existing LED driver and proposed wiring are compatible.
The inverter and battery dimensions fit the luminaire or planned remote mounting space.

Compare all six item codes, battery capacities and dimensions in the Technical Data tab.

Installation and documentation in Qatar

The kit uses a 220–240 V AC, 50–60 Hz supply and has a 16-hour charge time. It can be fitted inside the luminaire or installed remotely. IP20 equipment must be protected from moisture.

The manufacturer’s datasheet provides wiring guidance and lists TÜV Rheinland certification and applicable EN standards. Check driver limits and the required emergency light level for the actual luminaire and project before installation.

Browse emergency battery kits or request a quotation from INOVEC for the selected EV-EM-250 model.

Technical Data

EV-EM-250 models

All six models provide three hours of emergency operation and have a stated charge time of 16 hours.

Item code	Emergency power	LiFePO4 battery	Charge current
EV-EM-250-2.5-3H	2.5 W	6.4 V, 1500 mAh	300 mA
EV-EM-250-5-3H	5 W	6.4 V, 3000 mAh	300 mA
EV-EM-250-7-3H	7 W	6.4 V, 4000 mAh	300 mA
EV-EM-250-10-3H	10 W	6.4 V, 6000 mAh	300 mA
EV-EM-250-15-3H	15 W	12.8 V, 4500 mAh	400 mA
EV-EM-250-20-3H	20 W	12.8 V, 6000 mAh	400 mA

Electrical and environmental data

AC input	220–240 V AC, 50–60 Hz
LED module forward voltage / DC output	50–230 V DC
Power factor	>0.55
Input power	4.5 W (datasheet value)
AC current	30 mA at 240 V AC
Maximum inrush current	1.5 A at 240 V AC
Ingress protection	IP20
Maximum casing temperature	75°C
Manufacturer ambient temperature listing	0–55°C
Working temperature at full load	-25°C to 50°C
Working humidity	10–95% RH, non-condensing
Storage conditions	-40°C to 80°C; 10–95% RH
MTBF	50,000 hours minimum at 25°C ambient

Component dimensions

Models	Inverter (L × W × H)	Battery (L × W × H)
2.5 W	158 × 30 × 20 mm	105 × 40 × 20 mm
5 W	158 × 30 × 20 mm	170 × 36 × 20 mm
7 W	165 × 31.5 × 20 mm	170 × 36 × 20 mm
10 W	165 × 31.5 × 20 mm	235 × 36 × 19 mm
15 W	165 × 31.5 × 20 mm	300 × 36 × 38 mm
20 W	165 × 31.5 × 20 mm	300 × 36 × 38 mm

Certification and installation notes

The ENOV datasheet states TÜV Rheinland certification and lists EN 61347-2-7, EN 61347-2-13, EN 61347-1, EN 61547 and EN 61000-3-2. It also specifies a maximum LED driver output voltage of 250 V. Install only with power disconnected and keep the kit away from moisture. Confirm the correct wiring and project-specific emergency lighting performance with a qualified designer or installer.